TCL Legrand integrated ceiling bathroom decoration

2022-07-22
  • Detail

When decorating the bathroom, it's best not to change the water supply and drainage line too much. Even if it has to be changed, it should also be determined according to the corresponding situation. Many aspects should be taken into account, such as the different models of washing machines, the public positions of its upper and lower drainage will also be different. So what should we do to decorate the bathroom? TCL Legrand integrated ceiling gives consumers the following points to pay attention to:

1 Ceiling. Because the water vapor in the bathroom is heavy, we should choose those materials with the characteristics of waterproof, corrosion prevention and rust prevention

2. Ground. Be sure to be waterproof before laying floor tiles; After the tiles are laid, ensure that the tile surface has a drainage slope (generally about 1% (community network, forum) and the slope faces the floor drain; After laying ceramic tiles on the ground, the closed water test must be carried out for at least 24 hours; Pay attention to the joint and alignment with the wall tiles when laying the floor tiles, so as to ensure the overall feeling of the whole bathroom, so as to avoid creating a messy impression visually

3. Walls. The tiles on the wall should also be moisture-proof and waterproof, and the tiles should be flat when being pasted, and should be jointed and aligned with the floor tiles to ensure the integrity of the wall and the ground; If the outlet of the water supply pipeline is encountered, the cut of the ceramic tile should be small and appropriate, which is convenient for the flange cover on the water feeder to cover the cut, making the appearance perfect

4. Doors and windows. The bathroom had better have windows for ventilation; If there is no window, pay special attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door boundary should be slightly higher than the inner side of the bathroom; The gap between the door of the bathroom and the ground should be left a little larger to facilitate the return air; If it is a sliding door, a waterproof layer should be made between the sliding door and the bathroom tile

5. Circuit laying. Tin must be hung at the wire joints in the bathroom, and waterproof tape and insulating tape must be wrapped successively to ensure safety; The wire body must be covered with flame-retardant tubes; All switches and sockets must have moisture-proof boxes, and the location also depends on the size and location of the electrical appliance, so as to ensure convenient and reasonable use

6. Waterway reconstruction. The water supply and drainage line in the bathroom had better not be changed too much. If it needs to be changed, it should be determined according to the specific situation. For example, the location of water supply and drainage will be different with the model of washing machine

7. Sanitary ware installation. It is best to remember the distance between the drainage holes before decoration, and select the sanitary ware such as bathtub, bathroom, toilet and wash basin according to the size, so as to avoid the improper size during decoration; The installation of the toilet should be sealed with toilet mud first, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet is blocked

广州皮肤病医院

昆明眼科医院

西安耳鼻喉医院

Copyright © 2011 JIN SHI